DOT Drug Testing Crucible, PA

Our Local DOT Drug testing facilities in Crucible, PA and the surrounding areas provide DOT Drug Testing, DOT Alcohol Testing, DOT Physicals, Consortium enrollment and other DOT services for Employers, Single operators and all DOT modes who are required to comply with 49 CFR Part 40 in Crucible, PA including FMCSA, FTA, FAA, USCG, FRA and PHMSA . Testing centers are within minutes of your home or office and same day service is available in most cases.

"When you need a test, choose the best"

(800) 221-4291

Schedule Your Test

How to schedule a DOT drug test in Crucible, PA

To schedule any type of DOT drug test or alcohol test in Crucible, PA call our local scheduling department at (800) 221-4291. You may also schedule your DOT drug test online utilizing our express scheduling registration system by selecting your test and completing the Donor Information/Registration Section. You must register for the test prior to proceeding to the testing center.

The zip code you enter will be used to determine the closest DOT drug or DOT alcohol testing center which performs the type of test you have selected. A donor pass/registration form with the local testing center address, hours of operation and instructions will be sent to the e-mail address you provided. Take this form with you or have it available on your smart phone to provide to the testing center. No appointment is necessary in most cases. However, you must complete the donor information section and pay for the test at the time of registration.

Our laboratories are SAMHSA certified and all test results are verified by our in-house licensed physicians who serve as Medical Review Officers (MRO).

In addition to providing DOT drug testing and DOT breath alcohol testing in Crucible, PA, Accredited Drug Testing also has additional testing centers throughout the metropolitan area and surrounding cities.

On the road or on vacation, no worries, Accredited Drug Testing has over 20,000 testing centers in all cities Nationwide and we can schedule your test, ANYWHERE, ANYTIME!

(800) 221-4291

Schedule Your Test

What are the DOT drug testing requirements?

In 1991, the Omnibus Transportation Employee Testing Act created the following DOT Agencies which established drug and alcohol testing regulations to ensure that aircraft, trains, trucks, and buses were operated in a safe and responsible manner. As an employer or individual operating in a "Safety Sensitive" position, it is important to understand how these regulations impact you.

49 CFR Part 40 (commonly known as "part 40") explains:

• How drug and alcohol testing is conducted
• Who is authorized to participate in the drug and alcohol testing program
• What employees must do before they may return to duty after a drug and/or alcohol violation

Each DOT Agency and the USCG have specific regulations that cover:

• The agency's prohibitions on drug and alcohol use
• Who is subject to comply with these regulations
• What type of testing is required
• When testing is required
• Consequences of non-compliance

FMCSA Drug and Alcohol Clearinghouse

The Federal Motor Carrier Safety Administration (FMCSA) amended its rule that would establish requirements for commercial driver's license employers and individuals with regards to the drug and alcohol clearing house which will take affect on January 6, 2020.

The FMCSA Clearinghouse is a secure online database that will allow employers, the FMCSA, State Driver Licensing Agencies, State Law Enforcement and individual CDL operators to access real time important information about a CDL Driver's drug and alcohol program violations and the ultimate goal of this database is to enhance safety on our Nation's public roadways.

For specific requirements, click the appropriate agency listed below in which you or your company is regulated by. Ask about our DOT Complete Compliance Package!

• Federal Aviation Administration (FAA) (14 CFR Part 120)
• United States Coast Guard (USCG) (46 CFR Parts 4,5 and 16)
• Federal Motor Carrier Safety Administration (FMCSA) (49 CFR Part 382)
• Pipeline and Hazardous Materials Safety Administration (PHMSA) (49 CFR Part 199)
• Federal Transit Administration (FTA) (49 CFR Part 655)
• Federal Railroad Administration (FRA) (49 CFR Part 219)

The Opioid Overdose Crisis

Every day, more than 130 people in the United States die after overdosing on opioids. The misuse of and addiction to opioids, including prescription pain relievers, heroin, and synthetic opioids such as fentanyl, is a serious national crisis that affects public health as well as social and economic welfare. The Centers for Disease Control and Prevention estimates that the total "economic burden" of prescription opioid misuse alone in the United States is $78.5 billion a year, including the costs of healthcare, lost productivity, addiction treatment, and criminal justice involvement.

• Roughly 21 to 29 percent of patients prescribed opioids for chronic pain misuse them.
• Between 8 and 12 percent develop an opioid use disorder.
• An estimated 4 to 6 percent who misuse prescription opioids transition to heroin.
• About 80 percent of people who use heroin first misused prescription opioids.
• Opioid overdoses increased 30 percent from July 2016 through September 2017 in 52 areas in 45 states.
• The Midwestern region saw opioid overdoses increase 70 percent from July 2016 through September 2017.
• Opioid overdoses in large cities increase by 54 percent in 16 states.

In the late 1990s, pharmaceutical companies reassured the medical community that patients would not become addicted to prescription opioid pain relievers, and healthcare providers began to prescribe them at greater rates. This subsequently led to widespread diversion and misuse of these medications before it became clear that these medications could indeed be highly addictive.3,4 Opioid overdose rates began to increase. In 2017, more than 47,000 Americans died as a result of an opioid overdose, including prescription opioids, heroin, and illicitly manufactured fentanyl, a powerful synthetic opioid.1That same year, an estimated 1.7 million people in the United States suffered from substance use disorders related to prescription opioid pain relievers, and 652,000 suffered from a heroin use disorder (not mutually exclusive)

DOT Compliance Checklist in Crucible, PA

DOT 49 CFR Part 40 Requirements for Safety Sensitive Employees.
(FMCSA-FAA-USCG-FRA-PHMSA-FTA)

• Pre-Employment Tests
• Correct Federal Custody & Control Form (CCF)
• Substance Abuse Professional Process
• Regulations on File
• Random Pool Testing
• *Supervisor Training
• *Written Policy
• Post-Accident Testing Situations
• Previous Employers Checks
• Employee Education
• Record Keeping
• Removal of covered Employee
• Designated Employer Representative

* In addition, any company which employs 2 or more covered employees must have a written drug and alcohol policy and all supervisors must complete the DOT Supervisor Reasonable Suspicion Training. (Click here to learn more about our online training programs)

If a DOT covered employee or company does not have a copy of the original pre-employment drug test with a negative result, then a new DOT pre-employment drug test must be conducted, and the result maintained on file.

The department of transportation (DOT) requires that all DOT regulated "safety sensitive" employees have on file a negative DOT pre-employment drug test result and be a member of a DOT approved random selection consortium. In addition, if a DOT regulated company has more than one "safety sensitive" employee, the employer must also have a written DOT drug and alcohol policy and an on-site supervisor must have completed supervisor training for reasonable suspicion of illegal drug use or impairment.

To be compliant with DOT regulations, a company's DOT drug and alcohol testing program must have the following components. Failing to comply can result in significant fines and penalties.

(800) 221-4291

Schedule Your Test

What is a DOT Drug Test in Crucible, PA?

On January 1, 2018 the Department of Transportation (DOT) issued a new rule which altered the DOT 5 panel urine test. Employers and individuals should be aware that the current DOT drug test is still a urine drug test, collected by qualified collectors, analyzed at a SAMHSA certified laboratory and reviewed by a licensed Medical Review Officer. Below you will find a list of the drugs that are screened for in the DOT 5 panel urine drug test:

• Marijuana (THC)
• Cocaine
• Amphetamines
• Opioids**
• Phencyclidine (PCP)

** Special note: Opioids' was previously called Opiates' and all DOT drug tests will continue to include confirmation testing for Codeine, Morphine, and 6-AM (heroin) when necessary.

In the January rule change, the Department of Transportation (DOT) also added initial screening and confirmation testing for the semi-synthetic opioids Hydrocodone, Hydromorphone, Oxycodone, and Oxymorphone to this Opioids group

When is a DOT drug test required in Crucible, PA?

All safety sensitive employees regardless of DOT agency are required for the following drug testing and/or alcohol testing based on each situation:

• Pre-employment
• Random
• Reasonable suspicion
• Return to Duty
• Post-Accident
• Follow Up

What is DOT pre employment testing in Crucible, PA?

As a new hire or a current employee transferring from a non-safety sensitive function into a safety sensitive function (even with the same employer), you are required to submit to a DOT pre employment drug test.

Some employers may, but are not required to, conduct pre employment alcohol testing. Only after your employer receives a negative pre employment DOT drug test result (and negative alcohol test result - if administered) may you begin performing in a safety-sensitive capacity.

What is random DOT Drug Testing in Crucible, PA?

All safety sensitive employees are subject to unannounced random drug & alcohol testing. Alcohol testing is administered just prior to, during or just after performing safety-sensitive functions. Depending on the industry specific regulations, you may only be subject to random drug testing.

Listed below are the current (2019) DOT random testing rates for each DOT agency.

The following chart outlines the annual minimum drug and alcohol random testing rates established within DOT Agencies and the USCG for 2019.
DOT Agency	2019 Random Drug Testing Rate	2019 Random Alcohol Testing Rate
Federal Motor Carrier Safety Administration [FMCSA]	25%	10%
Federal Aviation Administration [FAA]	25%	10%
Federal Railroad Administration [FRA]	25% - Covered Service 50% - Maintenance of Way *	10% - Covered Service 25% - Maintenance of Way *
Federal Transit Administration [FTA]	50%	10%
Federal Transit Administration [FTA]	50%	N/A
United States Coast Guard [USCG] (with the Dept. of Homeland Security)	50%	N/A

(800) 221-4291

Enroll

What is reasonable suspicion DOT drug testing in Crucible, PA?

Safety sensitive individuals and employees are required to submit to any test (whether it is a drug test, alcohol test or both) that a supervisor requests based on reasonable suspicion. Reasonable suspicion means that one or more trained supervisors reasonably believes or suspects that you are under the influence of drugs or alcohol. Supervisors cannot require testing based on a hunch or guess alone; their suspicion must be based on observations concerning your appearance, behavior, speech and smell that are usually associated with drug or alcohol use

What is return to duty DOT Drug Testing in Crucible, PA?

If you have violated the prohibited drug & alcohol testing rules, you are required to take a return to duty drug and/or alcohol test before being allowed to return to a safety-sensitive function for any DOT regulated employer. You may also be subject to unannounced follow-up testing for at least 6 times in the first 12 months following your return to active safety-sensitive service.

Return-to-duty tests must be conducted under direct observation.

What is DOT post accident drug testing Crucible, PA?

If you are involved in an event (accident, crash, etc.) meeting certain criteria of the DOT agency, a post-accident drug test will be required. In most cases you will then have to take a drug and alcohol test if you are involved in a qualifying crash. Each DOT agency may have specific rules with regards to what is a post-accident test, for example, the FRA requires a blood specimen for drug testing and an alcohol test.

If you are involved in a qualifying accident, you are required to remain available for this testing and are not permitted to refuse testing.

Remember: Safety-sensitive employees are obligated by law to submit to and cooperate in drug & alcohol testing mandated by DOT regulations.

What is DOT follow up drug testing Crucible, PA?

DOT follow up testing occurs when an individual has violated the drug and alcohol testing rules. The amount of follow-up testing you receive is determined by a Substance Abuse Professional (SAP) and may continue for up to 5 years. This means the SAP will determine how many times you will be tested (at least 6 times in the first year), for how long, and for what substance (i.e. drugs, alcohol, or both). Your employer is responsible for ensuring that follow-up testing is conducted and completed. Follow up testing is in addition to all other DOT required testing and all follow-up tests will be observed. For more information on the SAP process or to locate a Substance Abuse Professional in Crucible, PA simply call us at (800)221-4291

To schedule a DOT drug or alcohol test in Crucible, PA Call (800) 221-4291 or select the Crucible, PA DOT Drug Testing Location Near You

Were you looking, instead, for:

Crucible, PA Drug Testing

Crucible, PA FMCSA Drug Testing

Crucible, PA Drug Test Locations

Crucible, PA Lab and Blood Testing

Crucible, PA STD Testing

Crucible, PA In-Home Drug Testing

Crucible, PA On-Site Drug Testing

Crucible, PA Hair Drug Testing

Crucible, PA DOT Drug Testing

Crucible, PA Mobile Drug Testing

Crucible, PA Alcohol and Drug Testing

Crucible, PA DOT Physicals

Crucible, PA DNA Testing
Related Regional Locations
Crucible, PA
Rices Landing, PA
Dry Tavern, PA
Carmichaels, PA
Nemacolin, PA

(Don't see a DOT drug testing location near you, call us at (800) 221-4291)

Accredited Drug Testing can schedule your DOT drug test at any of our Crucible, PA Drug testing locations, Call us Today!

"When You Need a Test, Choose the Best"

Accredited Drug Testing

(800) 221-4291

Local Area Info: Crucible steel

Crucible steel is steel made by melting pig iron (cast iron), iron, and sometimes steel, often along with sand, glass, ashes, and other fluxes, in a crucible. In ancient times steel and iron were impossible to melt using charcoal or coal fires, which could not produce temperatures high enough. However, pig iron, having a higher carbon content thus a lower melting point, could be melted, and by soaking wrought iron or steel in the liquid pig-iron for long periods of time, the carbon content of the pig iron could be reduced as it slowly diffused into the iron. Crucible steel of this type was produced in South and Central Asia during the medieval era. This generally produced a very hard steel, but also a composite steel that was inhomogeneous, consisting of a very high-carbon steel (formerly the pig-iron) and a lower-carbon steel (formerly the wrought iron). This often resulted in an intricate pattern when the steel was forged, filed or polished, with possibly the most well-known examples coming from the wootz steel used in Damascus swords. Due to the use of fluxes the steel was often much higher in quality (lacking impurities) and in carbon content compared to other methods of steel production of the time.

Techniques for production of high quality steel were developed by Benjamin Huntsman in England in the 18th century. Huntsman used coke rather than coal or charcoal, achieving temperatures high enough to melt steel and dissolve iron. Huntsman's process differed from some of the wootz processes in that it took a longer time to melt the steel and to cool it down and allowed more time for the diffusion of carbon. Huntsman's process used iron and steel as raw materials, in the form of blister steel, rather than direct conversion from cast iron as in puddling or the later Bessemer process. The ability to fully melt the steel removed any inhomogeneities in the steel, allowing the carbon to dissolve evenly into the liquid steel and negating the prior need for extensive blacksmithing in an attempt to achieve the same result. Similarly, it allowed steel to simply be poured into molds, or cast, for the first time. The homogeneous crystal structure of this cast steel improved its strength and hardness compared to preceding forms of steel. The use of fluxes allowed nearly complete extraction of impurities from the liquid, which could then simply float to the top for removal. This produced the first steel of modern quality, providing a means of efficiently changing excess wrought iron into useful steel. Huntsman's process greatly increased the European output of quality steel suitable for use in items like knives, tools, and machinery, helping to pave the way for the Industrial revolution.

Iron alloys are most broadly divided by their carbon content: cast iron has 2-4% carbon impurities; wrought iron oxidizes away most of its carbon, to less than 0.1%. The much more valuable steel has a delicately intermediate carbon fraction, and its material properties range according to the carbon percentage: high carbon steel is stronger but more brittle than low carbon steel. Crucible steel sequesters the raw input materials from the heat source, allowing precise control of carburization (raising) or oxidation (lowering carbon content). Fluxes, such as limestone, could be added to the crucible to remove or promote sulfur, silicon, and other impurities, further altering its material qualities.